Skip to main content

Pony Express Trail POTA US-4578 with Vertical on Project TouCans

 Heartened by the vertical antenna results at  San Francisco Maritime National Historical Park US-0757, I headed out to a pier in San Francisco near the Pony Express Trail, US-4578. Project TouCans did not disappoint, and I made one eyeball QSO in addition to the 7, (yeah, I didn't quite make the activation before the keyer's batteries ran out), QSOs I meade on the pier. Here's a map of the QSOs and Reverse Beacon spots.


Blue markers denote QSOs while yellow markers denote RBN spots. The color scale indicates signal strength using resistor value color coding. I find it really interesting that the rig made it up to Alaska again!
The other interesting point about this activation attempt is the location. I took the MUNI F to the Washington Street stop and then walked just a bit north to Pier 7


Here's what the rig and antenna setup looked like. The antenna is one half of TouCans' ordinary dipole taped to what's supposed to be a carbon fiber rod, (it doesn't seem to harm the antenna performance much which has led some to believe it is in fact a fiberglass rod), to form a quarter wave vertical. Yes, that is a metal raling holding the antenna up. Interestingly, it didn't seem to hurt much, and may have helped. The QSO to Alaska was lined up pretty well with the railing, (see the detail photo of  the map below.)


The other side of the dipole antenna is once again dangled off of the pier and into the Bay's saltwater as a ground. The rig laying horizontally on the ground is important. That's what cuts out AM broadcast station interference for TouCans. I'm not sure why yet.

detail of the QSO to Alaska along the metal railing

The entire outing was a lot of fun and reamrkably easy. Definitely: if you have an antenna, just string it up regardless of the conditions and see what happens!



Comments

Popular posts from this blog

The Valentine's Day Magnetic Monopole

There's an assymetry to the form of the two Maxwell's equations shown in picture 1.  While the divergence of the electric field is proportional to the electric charge density at a given point, the divergence of the magnetic field is equal to zero.  This is typically explained in the following way.  While we know that electrons, the fundamental electric charge carriers exist, evidence seems to indicate that magnetic monopoles, the particles that would carry magnetic 'charge', either don't exist, or, the energies required to create them are so high that they are exceedingly rare.  That doesn't stop us from looking for them though! Keeping with the theme of Fairbank[1] and his academic progeny over the semester break, today's post is about the discovery of a magnetic monopole candidate event by one of the Fairbank's graduate students, Blas Cabrera[2].  Cabrera was utilizing a loop type of magnetic monopole detector.  Its operation is in concept very sim

Cool Math Tricks: Deriving the Divergence, (Del or Nabla) into New (Cylindrical) Coordinate Systems

Now available as a Kindle ebook for 99 cents ! Get a spiffy ebook, and fund more physics The following is a pretty lengthy procedure, but converting the divergence, (nabla, del) operator between coordinate systems comes up pretty often. While there are tables for converting between common coordinate systems , there seem to be fewer explanations of the procedure for deriving the conversion, so here goes! What do we actually want? To convert the Cartesian nabla to the nabla for another coordinate system, say… cylindrical coordinates. What we’ll need: 1. The Cartesian Nabla: 2. A set of equations relating the Cartesian coordinates to cylindrical coordinates: 3. A set of equations relating the Cartesian basis vectors to the basis vectors of the new coordinate system: How to do it: Use the chain rule for differentiation to convert the derivatives with respect to the Cartesian variables to derivatives with respect to the cylindrical variables. The chain

More Cowbell! Record Production using Google Forms and Charts

First, the what : This article shows how to embed a new Google Form into any web page. To demonstrate ths, a chart and form that allow blog readers to control the recording levels of each instrument in Blue Oyster Cult's "(Don't Fear) The Reaper" is used. HTML code from the Google version of the form included on this page is shown and the parts that need to be modified are highlighted. Next, the why : Google recently released an e-mail form feature that allows users of Google Documents to create an e-mail a form that automatically places each user's input into an associated spreadsheet. As it turns out, with a little bit of work, the forms that are created by Google Docs can be embedded into any web page. Now, The Goods: Click on the instrument you want turned up, click the submit button and then refresh the page. Through the magic of Google Forms as soon as you click on submit and refresh this web page, the data chart will update immediately. Turn up the: