Unschooling and Python || wget, tar -xvzf and for loops

Last night was a shorter run at things in general because KO6BTY, (the 13 year old known as Diaze here), and I got a later start.

We spent what felt like forever, but what was actually only 12 minutes trying to share files from the 'usual' file side of the kid's Chromebook with the Linux side using file folders and whatnot. Nothing worked. For whatever reason, the Linux folders weren't visible in the machine's 'My Files' app. Sharing folders led to the machine basically hanging. Then! Then, we handled the issue like a couple of programmers, and instead of downloading in one system and trying to copy to anther, Diaze just ran the following from her Linux terminal

wget https://data.cosmic.ucar.edu/gnss-ro/cosmic2/provisional/spaceWeather/level2/2024/203/ionPrf_prov1_2024_203.tar.gz

That was snazzy! It just brought the file right in because, well, command line interface tools are just... snazzy.

Having a chat record of our work together is also really helpful. I remember feeling like we'd wasted so much time trying to copy files over. We literally spent 12 minutes. Not. The. End. Of.The. World. Happily!

Then! The kid used tar to unzip the compressed data tarball. Watching her as the 4000 files fold out onto the drive was a lot of fun. This is a good project! I also loved the part where she caught on that this was the same Python with the same constructs she'd been using on the Project TouCan's remote Morse code key.

From there, we got back into using the netCDF4 package to look at data. We talked about Python Dictionaries and then looked at the latitutude values of a radio occultation satellite pass that measured the electron density of the ionosphere.

The goal at this point is for KO6BTY to create a map of the latitude and longitude values in Datasette to see where the satellite pass took place with respect to Earth.

Comments

Cool Math Tricks: Deriving the Divergence, (Del or Nabla) into New (Cylindrical) Coordinate Systems

Now available as a Kindle ebook for 99 cents ! Get a spiffy ebook, and fund more physics The following is a pretty lengthy procedure, but converting the divergence, (nabla, del) operator between coordinate systems comes up pretty often. While there are tables for converting between common coordinate systems , there seem to be fewer explanations of the procedure for deriving the conversion, so here goes! What do we actually want? To convert the Cartesian nabla to the nabla for another coordinate system, say… cylindrical coordinates. What we’ll need: 1. The Cartesian Nabla: 2. A set of equations relating the Cartesian coordinates to cylindrical coordinates: 3. A set of equations relating the Cartesian basis vectors to the basis vectors of the new coordinate system: How to do it: Use the chain rule for differentiation to convert the derivatives with respect to the Cartesian variables to derivatives with respect to the cylindrical variables. The chain ...

The Alcubierre Warp Drive Tophat Function and Open Science with Sage

I transferred yesterday's Mathematica file with the Alcubierre warp drive[2] line element and space curvature calculations to the +Sage Mathematical Software System today, (the files been added to the public repository [3]). If you haven't used Sage before, it's a Python based software package that's similar in functionality to Mathematica. Oh, and it' free. I also worked a little more on understanding the theory, but frankly, I made far more progress with the software than the theory. What follows will be a little more of the Alcubierre theory, plus, a cool Sage interactive demo of one of the Alcubierre functions[1], as well as a bit about my first experience with using Sage. Theory The theory is fun, but it's moving slowly. Here's the chalk board from this morning's discussion Alcubierre setup the derivation using something called the 3+1 formalism which means we consider space to be flat, (in this case), slices that are labelled ...

How Many Files Can You Add to a GPT Project? An Interview with GPT-5 on Limits, Context Engineering Tips, and Chats

Setting the scene: I’m tinkering with Project TouCans, knee-deep in radio logs, SQLite dumps, and Cesium code. Naturally, I’m wondering if shoving all this into one GPT Project is a recipe for brilliance… or for disaster. So I turn to Vril — you know, after Brainy from the Legion of Super-Heroes , because what else do you call your AI sidekick who always has the answers? Time to ask him straight up. [ As an aside, yes, GPT-5 has decided to sometimes call me Vail. I'm not sure why to be honest. Also, I asked Vril, er GPT-5, to write up our interview for me. Apparently, me asking it to 'Bro' up a few stories, just for fun, has convinced Vril that I use 'Like,' more than I actually might. ] Me (Vail): So Vril, how many files can I throw into a GPT Project before it just starts choking? Like, is there some magic number where the context window taps out and everything falls apart? GPT-5 (Vril): Great question. There’s no single hard file limit. What matters is ...

Copasetic Flow

Search This Blog