Skip to main content

Cool Math Tricks: Deriving the Divergence, (Del or Nabla) into New (Cylindrical) Coordinate Systems

Now available as a Kindle ebook for 99 cents! Get a spiffy ebook, and fund more physics

The following is a pretty lengthy procedure, but converting the divergence, (nabla, del) operator between coordinate systems comes up pretty often. While there are tables for converting between common coordinate systems, there seem to be fewer explanations of the procedure for deriving the conversion, so here goes!

What do we actually want?

To convert the Cartesian nabla



to the nabla for another coordinate system, say… cylindrical coordinates.



What we’ll need:

1. The Cartesian Nabla:



2. A set of equations relating the Cartesian coordinates to cylindrical coordinates:



3. A set of equations relating the Cartesian basis vectors to the basis vectors of the new coordinate system:



How to do it:

Use the chain rule for differentiation to convert the derivatives with respect to the Cartesian variables to derivatives with respect to the cylindrical variables.

The chain rule can be used to convert a differential operator in terms of one variable into a series of differential operators in terms of other variables that the first variable depends on. This is exactly what we need because we want to start out with a differential operator in terms of x,




in our Cartesian to cylindrical example and convert it to differential operators in terms of the cylindrical variables, . For x, the chain rule gives us:



NOTE: More generally, if you’re given a differential operator in terms of a variable, u, that can be expressed in terms of n other variables, v, then to convert the differential operator in terms of u to differential operators in terms of the v’s the chain rule gives:



This is explained very nicely and in more detail here and here.

OK, so let’s get to work converting the three differential operators of the Cartesian nabla into differential operators in terms of cylindrical coordinates. We start with x,



using,



We can construct the first differential term above as:



but, we really need to get all the x’s and y’s out of the mix and just have cylindrical coordinates remaining. So, using a few substitutions we get:



Now, follow the same procedure for the next differential term in the chain rule.



Remember though that r depends on x and y, so when we differentiate, we need to expand r and use the simple one-variable chain rule. Using a table of derivates for the arccosine, we get:



The final derivative is taken using the quotient rule:



We already know from our work above that



so



Now, we start the lengthy process of simplifying:



Because z is the same z as in the Cartesian system, it doesn’t depend on x, (exactly as in the Cartesian system), so we have



and our complete conversion for the x derivative term is:



Now use the same techniques to convert the differential for y:



Starting in a similar manner:



Then, evaluating the second term of the chain rule we get:



Remember again that r depends on x and y, so when we differentiate, we need to expand r and use the one variable chain rule.



The final derivative is taken using the quotient rule:



We already know from our work above that



so



Now, we simplify again:



So,



Finally, since z is not transformed between coordinate systems:



Now that we have each differential converted, we can write the nabla operator as



Which is kind of a mess! We know that when we’re finished we expect to see nicely grouped cylindrical differential terms with cylindrical unit vectors, so let’s group on the cylindrical differentials



Now remembering our original definition of cylindrical unit vectors,



We can make two more substitutions and arrive at the final result for nabla in cylindrical coordinates!

Comments

  1. Hi Hamilton,

    very nice tutorial. Following your reasoning I was able to derive the Nabla from Cartesian coordinate system to my own defined non-standard spherical coordinate system. And it worked perfectly!

    Thanks again.

    Hernan

    ReplyDelete
  2. Thank you....

    great help!

    --Su

    ReplyDelete
  3. Hi,
    Good article. I noticed a shortcut for d phi / dx and d phi / dy. If you use phi = arctan(y/x),
    d phi / dx = 1/(1+(y/x)^2).d/dx(y/x)
    =-1/(1+(y/x)^2).y/x^2
    =-y/(x^2+y^2)
    =-sin(phi)/r
    similar for d phi/dy, and avoids a lot of messy algebra.

    ReplyDelete
  4. Firstly, thanks for this, I've been trying in vain to derive something similar and I've finally noticed that I've been using the wrong transformation of unit vectors!

    Similarly to previous comments, this particular result falls out fairly quickly when you note that r_x = cos(phi); r_y = sin(phi); phi_x = -sin(phi)/r and phi_y=cos(phi)/r. Otherwise a good exercise in the chain rule!

    ReplyDelete
  5. Your derivation is great, but it's too lengthy. You can actually derive it starting with the definition of divergence, which is the limit as the volume of a closed surface approaches zero of the flux through that surface. Taking the surface as the standard differential volume unit in cylindrical coordinates, you can directly derive it much more quickly than going through the chain rule and coordinate transformations.

    ReplyDelete
  6. Thank you Doughboy! That's an awesome pointer! It took me awhile to work through all the details of what you said, but in the end it's far easier and left me with a physical understanding of the derivation instead of just a mechanical list of steps. Expect to see a post on deriving the spherical laplacian in this way soon. Thanks again!

    ReplyDelete
  7. Hi Doughboy,
    Is the following for spherical coordinates about what you had in mind?
    http://copaseticflow.blogspot.com/2012/09/an-intuitive-way-to-spherical-gradient.html

    Thanks again! You made my homework this week a lot easier and much more of a learning experience, (in a good way).

    ReplyDelete
  8. Awesome stuff man!
    Your work saved me a lot of time
    Thanks a lot

    ReplyDelete
  9. thanxs bro.. great help

    ReplyDelete
  10. Thank you a lot man!!!

    ReplyDelete
  11. This comment has been removed by a blog administrator.

    ReplyDelete

Post a Comment

Please leave your comments on this topic:

Popular posts from this blog

The Valentine's Day Magnetic Monopole

There's an assymetry to the form of the two Maxwell's equations shown in picture 1.  While the divergence of the electric field is proportional to the electric charge density at a given point, the divergence of the magnetic field is equal to zero.  This is typically explained in the following way.  While we know that electrons, the fundamental electric charge carriers exist, evidence seems to indicate that magnetic monopoles, the particles that would carry magnetic 'charge', either don't exist, or, the energies required to create them are so high that they are exceedingly rare.  That doesn't stop us from looking for them though! Keeping with the theme of Fairbank[1] and his academic progeny over the semester break, today's post is about the discovery of a magnetic monopole candidate event by one of the Fairbank's graduate students, Blas Cabrera[2].  Cabrera was utilizing a loop type of magnetic monopole detector.  Its operation is in concept very sim

More Cowbell! Record Production using Google Forms and Charts

First, the what : This article shows how to embed a new Google Form into any web page. To demonstrate ths, a chart and form that allow blog readers to control the recording levels of each instrument in Blue Oyster Cult's "(Don't Fear) The Reaper" is used. HTML code from the Google version of the form included on this page is shown and the parts that need to be modified are highlighted. Next, the why : Google recently released an e-mail form feature that allows users of Google Documents to create an e-mail a form that automatically places each user's input into an associated spreadsheet. As it turns out, with a little bit of work, the forms that are created by Google Docs can be embedded into any web page. Now, The Goods: Click on the instrument you want turned up, click the submit button and then refresh the page. Through the magic of Google Forms as soon as you click on submit and refresh this web page, the data chart will update immediately. Turn up the: