POTA from Gloria Dei Church National Historic Place US-10802

Nine year-old Tawnse and I got half-way to activating the park before the ML-300 Bluetooth transmitter gave up the ghost. I knew I forgot to charge something.

Tawnse was so entranced with the walled Philadelphia park she thought we should have stayed the extra half hour we would have probably needed to activate it.

What led Tawnse to this scheduling priority decision? Turns out the park doubles as the neighborhood dog park. There's only one way in or out though a small and, of course, historic cemetery. By the time the pups got to the wander-around-unleashed bit we were in they were far to transfixed to try to leave. Turns out two of the pups were aspiring radio engineers to boot .We’ll get to that.

Because our antenna was low, propagation wasn't great on 20m at 15:30 UTC on the East Coast next to an interstate in Philadelphia. Even so right after I self-spotted a fellow ham immediately called in from South Dakota. After that, the QSOs came in every five minutes or so on average. We talked to Louisiana, two hams from Florida (whose QSOs came in back to back, and a ham from Tennessee.

I'm curious if the QSOs from Florida might have come from the same physical station. I’ll find out when I map out the activation. In the meantime, I really, really need to think more about local-first data and how to download map tiles onto this device. I remember that Simon Wllison has written about this more than once on his blog, so Im basically leaving a reminder to myself to go look that up. It would be nice to map things when I’m offline at least down to geographic regions like, lets say, cities?

The other folks who stopped by the park were very, very nice. Also, they had dogs. Tawnse and I met two daschunds, one of which was very fluffy, and two Golden Retrievers. All of whom introduced themselves at our picnic table.

Did I mention we had a low dipole placement? This would be the bit about our two radio-engineering dogs.

The Golden Retrievers immediately caught on to our dipole positioning being just to low, and they were certain they could fix it. They first sniffed out the rolls of tarred twine laying on the ground below each of the two trees that supported the dipole. They considered pulling on the twine. Perhaps I just hadn't really put my back into it. Then, they each decided it was probably a problem with the tree, and started to climb the tree following the twine. Until they remembered that they were dogs and heh, dogs don't climb trees. Abashed, one of them gave up. The other one though… That guy! He followed the antenna out of the tree till he saw TouCans which was only about six feet up, putting the dipole seven feet up.

He. Could. Fix. This. He leapt at the radio to see if maybe he could adjust it. Fortunately, for all of us, his vertical leap was just a bit too short.

Tawnse just giggled and giggled and giggled. You gotta love engineering dogs.

Like I mentioned before, the Bluetooth transmitter's battery died right after the 5th QSO, and that was that. We were off to pick up KO6BTY from the library and get some of the best Italian food in the world from Paesanos on 9th St.

QSO map coming soon.

The Valentine's Day Magnetic Monopole

There's an assymetry to the form of the two Maxwell's equations shown in picture 1. While the divergence of the electric field is proportional to the electric charge density at a given point, the divergence of the magnetic field is equal to zero. This is typically explained in the following way. While we know that electrons, the fundamental electric charge carriers exist, evidence seems to indicate that magnetic monopoles, the particles that would carry magnetic 'charge', either don't exist, or, the energies required to create them are so high that they are exceedingly rare. That doesn't stop us from looking for them though! Keeping with the theme of Fairbank[1] and his academic progeny over the semester break, today's post is about the discovery of a magnetic monopole candidate event by one of the Fairbank's graduate students, Blas Cabrera[2]. Cabrera was utilizing a loop type of magnetic monopole detector. Its operation is in concept very sim

More Cowbell! Record Production using Google Forms and Charts

First, the what : This article shows how to embed a new Google Form into any web page. To demonstrate ths, a chart and form that allow blog readers to control the recording levels of each instrument in Blue Oyster Cult's "(Don't Fear) The Reaper" is used. HTML code from the Google version of the form included on this page is shown and the parts that need to be modified are highlighted. Next, the why : Google recently released an e-mail form feature that allows users of Google Documents to create an e-mail a form that automatically places each user's input into an associated spreadsheet. As it turns out, with a little bit of work, the forms that are created by Google Docs can be embedded into any web page. Now, The Goods: Click on the instrument you want turned up, click the submit button and then refresh the page. Through the magic of Google Forms as soon as you click on submit and refresh this web page, the data chart will update immediately. Turn up the:

Cool Math Tricks: Deriving the Divergence, (Del or Nabla) into New (Cylindrical) Coordinate Systems

Now available as a Kindle ebook for 99 cents ! Get a spiffy ebook, and fund more physics The following is a pretty lengthy procedure, but converting the divergence, (nabla, del) operator between coordinate systems comes up pretty often. While there are tables for converting between common coordinate systems , there seem to be fewer explanations of the procedure for deriving the conversion, so here goes! What do we actually want? To convert the Cartesian nabla to the nabla for another coordinate system, say… cylindrical coordinates. What we’ll need: 1. The Cartesian Nabla: 2. A set of equations relating the Cartesian coordinates to cylindrical coordinates: 3. A set of equations relating the Cartesian basis vectors to the basis vectors of the new coordinate system: How to do it: Use the chain rule for differentiation to convert the derivatives with respect to the Cartesian variables to derivatives with respect to the cylindrical variables. The chain

Copasetic Flow

Search This Blog