Skip to main content

Machine Shop!!!

So, in physics graduate school, you have your quantum mechanics, and your EM, and your statistical mechanics, and classical mechanics, and so on, and all of this is very well and good.  And then, if you're very, very lucky, there's machine shop class and it's awesome!!!  Obstensibly, the class is to teach you to be a better communicator with machine shops, but you still get to learn how to use the tools!  You actually get to learn how to build scientific instruments.  It's not for everyone though.  Heisenberg for example almost didn't get his PhD because of issues with his experimental lab grades.

Machine shop started for me today after missing the first two meetings for an engineering conference last week.  Today we started in with the tools.  If you'd told me last week that an hour long lecture on saws would be interesting, I might have rolled my eyes, but not anymore!  We learned about a few different kinds of saws.  Then, we learned that with the vast majority of saws in the States, you should always push the saw across the material and never pull.  By pulling, you'll run the saw teeth over the material in their least reinforced direction and they'll break off, (picture 1).


It turns out there is one saw that you pull across the material, the Japanese dozuki saw.

We learned about the three tooth rule.  Ideally, you want to select the pitch, (number of teeth per inch), of your saw blade so you can have no fewer than three teeth, and no less than nine in contact with the material at all times.  Any fewer and the blade gets stuck, any more, and it becomes harder to push across the material and less efficient.

Oh, and we learned a new word: kerf.  Kerf is the width across your saw teeth.  The dozuki saw has teeth that are flush with the blade, so it makes a very good saw for trimming nubs off of parts.  Most saws have teeth that extend out from the body of the blade, making for a wider kerf, (picture 2).



More of the pretty, yet oh so cool notes from machine shop!




Comments

Popular posts from this blog

More Cowbell! Record Production using Google Forms and Charts

First, the what : This article shows how to embed a new Google Form into any web page. To demonstrate ths, a chart and form that allow blog readers to control the recording levels of each instrument in Blue Oyster Cult's "(Don't Fear) The Reaper" is used. HTML code from the Google version of the form included on this page is shown and the parts that need to be modified are highlighted. Next, the why : Google recently released an e-mail form feature that allows users of Google Documents to create an e-mail a form that automatically places each user's input into an associated spreadsheet. As it turns out, with a little bit of work, the forms that are created by Google Docs can be embedded into any web page. Now, The Goods: Click on the instrument you want turned up, click the submit button and then refresh the page. Through the magic of Google Forms as soon as you click on submit and refresh this web page, the data chart will update immediately. Turn up the:

Cool Math Tricks: Deriving the Divergence, (Del or Nabla) into New (Cylindrical) Coordinate Systems

Now available as a Kindle ebook for 99 cents ! Get a spiffy ebook, and fund more physics The following is a pretty lengthy procedure, but converting the divergence, (nabla, del) operator between coordinate systems comes up pretty often. While there are tables for converting between common coordinate systems , there seem to be fewer explanations of the procedure for deriving the conversion, so here goes! What do we actually want? To convert the Cartesian nabla to the nabla for another coordinate system, say… cylindrical coordinates. What we’ll need: 1. The Cartesian Nabla: 2. A set of equations relating the Cartesian coordinates to cylindrical coordinates: 3. A set of equations relating the Cartesian basis vectors to the basis vectors of the new coordinate system: How to do it: Use the chain rule for differentiation to convert the derivatives with respect to the Cartesian variables to derivatives with respect to the cylindrical variables. The chain

The Valentine's Day Magnetic Monopole

There's an assymetry to the form of the two Maxwell's equations shown in picture 1.  While the divergence of the electric field is proportional to the electric charge density at a given point, the divergence of the magnetic field is equal to zero.  This is typically explained in the following way.  While we know that electrons, the fundamental electric charge carriers exist, evidence seems to indicate that magnetic monopoles, the particles that would carry magnetic 'charge', either don't exist, or, the energies required to create them are so high that they are exceedingly rare.  That doesn't stop us from looking for them though! Keeping with the theme of Fairbank[1] and his academic progeny over the semester break, today's post is about the discovery of a magnetic monopole candidate event by one of the Fairbank's graduate students, Blas Cabrera[2].  Cabrera was utilizing a loop type of magnetic monopole detector.  Its operation is in concept very sim